Classic Bronco Script Badge

[Bear007]

I am looking into putting a Bronco script badge on my Raptor. Has anyone put one on their Raptor? I have not have the graphics package.
Any thoughts?

 

[Birdsonthebat]

I am looking into putting a Bronco script badge on my Raptor. Has anyone put one on their Raptor? I have not have the graphics package.
Any

Front doors on the bottom, right above the crease. 3.5 inches from the start of the door.

 

[DallasCajun]

With the engine exhaust ports on the front quarter-panels I think that it would be a little busy placing anything in the standard Bronco model decal location. But I do like @Birdsonthebat idea of lower front corner of drivers door. I placed a US Flag decal in that same location except under the crease.

 

[Birdsonthebat]

I actually found this while looking for a soft top for the BRaptor. Ernie off the G6 board gave me the idea, as I’ve pretty much cloned his build, lol.

 

[Bear007]

Front doors on the bottom, right above the crease. 3.5 inches from the start of the door.View attachment 7727

Thank you. Looks great I have a May 4th build date. Hope to be ready for the trails soon. Northern Alberta.

 

[Birdsonthebat]

Thank you. Looks great I have a May 4th build date. Hope to be ready for the trails soon. Northern Alberta.

They’re worth the wait.

 

[xandao72]

You know that you got an excellent vehicle when the competition (jeepers) drive by you and waive at you approvingly.

 

[xandao72]

I've got the bronco classic on Amazon and the Raptor decal on Etsy.

 

[Birdsonthebat]

I've got the bronco classic on Amazon and the Raptor decal on Etsy.

Sharp!

 

[Apache 8]

I've got the bronco classic on Amazon and the Raptor decal on Etsy.

I really like the classic early bronco script, but I did not think there was enough space anywhere on the raptor for it. Is yours a full size script or slightly smaller? I do not want to put one on if it looks like it takes up too much room and looks shoehorned into a given space. Your picture looks pretty good. Can take another directly from the side? Thanks! And great raptor sticker too>

 

[xandao72]

I really like the classic early bronco script, but I did not think there was enough space anywhere on the raptor for it. Is yours a full size script or slightly smaller? I do not want to put one on if it looks like it takes up too much room and looks shoehorned into a given space. Your picture looks pretty good. Can take another directly from the side? Thanks! And great raptor sticker too>

sorry for the pic! he's in a tight garage! as soon stop pouring down I'll bring him out and take a full side picture. the Bronco script I got is 10.7" matte black hard plastic, but you can find metal and glossy as well. I choose plastic because I was afraid that the space wouldn't be completely flat so the plastic would have some flexibility. but a word of advice, when you're ready to place your script be sure to use a blue painter's tape below it to insure that it will be straight, because once that sucker stuck, IT STUCK! mine wasn't perfect as I want it, so I try to pull it out to rearrange, well, lets put this way, it's a very good sticker in the back. As I said, not perfectly straight but people still think it came from factory, so I'm happy.

 

[fuhrius]

I've got the bronco classic on Amazon and the Raptor decal on Etsy.

can you provide a pointer / link to the Raptor decal on Etsy?

 

[xandao72]

can you provide a pointer / link to the Raptor decal on Etsy?

sure thing!

Thin Blue Line Raptor Decal Thin Red Line Thin Pink Ford - Etsy

This Bumper Stickers item by FitzandSonsCustoms has 3 favorites from Etsy shoppers. Ships from Upton, MA. Listed on Apr 12, 2023

www.etsy.com

 

[xandao72]

I also found this one.

2017-2020 Ford Raptor Side Decals - Etsy

This Car Accessories item by RckyMtnGraphics has 34 favorites from Etsy shoppers. Ships from West Valley City, UT. Listed on Mar 3, 2024

www.etsy.com

 

[xandao72]

I really like the classic early bronco script, but I did not think there was enough space anywhere on the raptor for it. Is yours a full size script or slightly smaller? I do not want to put one on if it looks like it takes up too much room and looks shoehorned into a given space. Your picture looks pretty good. Can take another directly from the side? Thanks! And great raptor sticker too>

Full side view

 

[Tacoman03]

Got my Raptor decal from Vinyl Sometimes site....

 

[rlmfire288]

As a Raptor owner now and wanting to do as near an accurate ''66-'67 tribute I'm struggling to find a script bronco fender logo that will fit our vehicle choice. The NOS repros or '21-'25 repros won't work as they are 11" long and we only have 9.5" door to fender vent piece to work with. We need a 6-7.5" scaled replica to work with. So far there's a 5.25" piece to work with but I'd like more accurate scaling. I've requested as a Raptor owner a larger version than their (Wild Horses BTW) 5.25" version. I'll let you know if they are willing to make a Raptor version of this for us. I know I'm not alone in wanting a '66-'67 type heritage/tribute badging option for our Raptors.

BTW, I have a current 4 letter option "heritage grill" coming and the appropriate current "FORD" letters to go with it. I'd rather do the old school chrome and red letters. What version of the old stock letters fit the "heritage" grill best, if anyone has played with this choice yet?

Thanks and I'll notice an old school styled new bronco and I'll be that guy who stops you to talk about your build. Hope you don't mind.

 

[Bschurr]

As a Raptor owner now and wanting to do as near an accurate ''66-'67 tribute I'm struggling to find a script bronco fender logo that will fit our vehicle choice. The NOS repros or '21-'25 repros won't work as they are 11" long and we only have 9.5" door to fender vent piece to work with. We need a 6-7.5" scaled replica to work with. So far there's a 5.25" piece to work with but I'd like more accurate scaling. I've requested as a Raptor owner a larger version than their (Wild Horses BTW) 5.25" version. I'll let you know if they are willing to make a Raptor version of this for us. I know I'm not alone in wanting a '66-'67 type heritage/tribute badging option for our Raptors.

BTW, I have a current 4 letter option "heritage grill" coming and the appropriate current "FORD" letters to go with it. I'd rather do the old school chrome and red letters. What version of the old stock letters fit the "heritage" grill best, if anyone has played with this choice yet?

Thanks and I'll notice an old school styled new bronco and I'll be that guy who stops you to talk about your build. Hope you don't mind.

If you swap in a Heritage, don’t forget that you will need to account for the DOT required 3 amber lights up front…

 

[Apache 8]

As a Raptor owner now and wanting to do as near an accurate ''66-'67 tribute I'm struggling to find a script bronco fender logo that will fit our vehicle choice. The NOS repros or '21-'25 repros won't work as they are 11" long and we only have 9.5" door to fender vent piece to work with. We need a 6-7.5" scaled replica to work with. So far there's a 5.25" piece to work with but I'd like more accurate scaling. I've requested as a Raptor owner a larger version than their (Wild Horses BTW) 5.25" version. I'll let you know if they are willing to make a Raptor version of this for us. I know I'm not alone in wanting a '66-'67 type heritage/tribute badging option for our Raptors.

BTW, I have a current 4 letter option "heritage grill" coming and the appropriate current "FORD" letters to go with it. I'd rather do the old school chrome and red letters. What version of the old stock letters fit the "heritage" grill best, if anyone has played with this choice yet?

Thanks and I'll notice an old school styled new bronco and I'll be that guy who stops you to talk about your build. Hope you don't mind.

Instead of getting a different grill, have you considered having your existing grill re-painted Argent silver to match the early broncos? It already has the FORD lettering which you could paint red.

 

[TurboS]

As a Raptor owner now and wanting to do as near an accurate ''66-'67 tribute I'm struggling to find a script bronco fender logo that will fit our vehicle choice. The NOS repros or '21-'25 repros won't work as they are 11" long and we only have 9.5" door to fender vent piece to work with. We need a 6-7.5" scaled replica to work with. So far there's a 5.25" piece to work with but I'd like more accurate scaling. I've requested as a Raptor owner a larger version than their (Wild Horses BTW) 5.25" version. I'll let you know if they are willing to make a Raptor version of this for us. I know I'm not alone in wanting a '66-'67 type heritage/tribute badging option for our Raptors.

BTW, I have a current 4 letter option "heritage grill" coming and the appropriate current "FORD" letters to go with it. I'd rather do the old school chrome and red letters. What version of the old stock letters fit the "heritage" grill best, if anyone has played with this choice yet?

Thanks and I'll notice an old school styled new bronco and I'll be that guy who stops you to talk about your build. Hope you don't mind.

Instead of getting a different grill, have you considered having your existing grill re-painted Argent silver to match the early broncos? It already has the FORD lettering which you could paint red.

The Bronco Raptor grill has larger openings than any of the other Bronco models to accommodate the required additional air flow for cooling. As @Apache 8 suggests, consider painting your OEM grill and use the TufSkinz Ford licensed "FORD" grill letters in your choice of color.