ForScan OBD LINK Anyone used this on the Raptor?

[Raptor260]

Haven't used FORScan on the Bronco Raptor yet, but I have on wife's Bronco Badlands. Link below to Bronco Module/Address/values spreadsheet.

Google Bronco Module mapping spreadsheet for use with FORScan.

I used that sheet on my 2023 BRaptor,
Lights, chimes, seatbelts, cluster and others… works great.

 

[Ironmike]

I used that sheet on my 2023 BRaptor,
Lights, chimes, seatbelts, cluster and others… works great.

FYI, I think there is a Braptor-specific thread regarding ForScan on the B6G forum. This is important wrt to model specific things like the R button and Auto Start/Stop on the Raptor.

 

[BlackOval]

Thats more than I had, Thanks!!!!! I'll start nuking things today. Not a fan of annoying chimes and dinger thingers

 

[BlackOval]

So just experimenting I used the same IPC addresses as on my 2024 F350 Super Duty and changed as follows....the Bronco doesnt even know seatbelts are in existance

IPC "as built data" change to......
720-13-01 0000 0000 0000
720-13-02 0000 0000
720-14-01 0000 0000 0000
720-14-02 0000 0000

The 2024 would lock the seat belt menu on the cluster screen if someone would unbuckle while engine running. The "OK" menu was there to stay and would not disappear unless the power was cycled. These changes fix that issue as stated above, literally does not even know it has seatbelts now

 

[ChiliPepper]

So just experimenting I used the same IPC addresses as on my 2024 F350 Super Duty and changed as follows....the Bronco doesnt even know seatbelts are in existance

IPC "as built data" change to......
720-13-01 0000 0000 0000
720-13-02 0000 0000
720-14-01 0000 0000 0000
720-14-02 0000 0000

The 2024 would lock the seat belt menu on the cluster screen if someone would unbuckle while engine running. The "OK" menu was there to stay and would not disappear unless the power was cycled. These changes fix that issue as stated above, literally does not even know it has seatbelts now

Interesting, I may have to "experiment" also.

 

[BlackOval]

Interesting, I may have to "experiment" also.

Made several changes and the only change that did not work was the Auto Start/Stop disable.