What did you do to your Bronco Raptor today?

Installed the Yota under hood LED light today. I installed the plunger on the battery mount so I wasn't drilling into any painted bodywork. Worked like a charm and super easy to install. Throws a good bit of light into the engine bay as well.

IMG_7761.webp
IMG_7762.webp
IMG_7756.webp
IMG_7760.webp
 

Attachments

  • IMG_7761.webp
    IMG_7761.webp
    350.9 KB · Views: 9
  • IMG_7762.webp
    IMG_7762.webp
    419.2 KB · Views: 14
That will be nice, as its extremely dark when of roading.
 

Attachments

  • PXL_20250330_191556637.webp
    PXL_20250330_191556637.webp
    204.1 KB · Views: 10
  • PXL_20250330_191549423.webp
    PXL_20250330_191549423.webp
    158.6 KB · Views: 10
  • PXL_20250330_191545992.webp
    PXL_20250330_191545992.webp
    152.4 KB · Views: 9
  • PXL_20250330_191543199.webp
    PXL_20250330_191543199.webp
    177.7 KB · Views: 10
installed the Rock slider Skid Plate's, painted the rivets to match the plate.
Thinking of a replacement for the Rock Slider logo. Possibly a coder orange Raptor logo.

Rock Slide Engineering 4 Door Step-Slider Skid Plate
Nice! One of my favorite rock rails... and steps. :cool:
The Rock Slider emblem is to let the common pickup/suv drivers know that you do Not have running boards. :giggle:
 
Need to get the skid plates myself. How hard was the installation?
The original install was not easy, I would recommend a local off road shop.
I ordered the steps, lights, door delete kit and covers from Buckle Up off road. Krista is very helpful.
Rock Slide Engineering 4 Door Step Slider DRIVER Side
Rock Slide Engineering 4 Door Step Slider PASSENGER Side
Rock Slide Engineering 4 Door Step-Slider Skid Plates for
Rock Slide Engineering Step Slider Door Delete Kit
Rock Slide Engineering Step Sliders Light Kit
 
I already have the Rockslide steps installed along with the light kit, just need the skid plates added. for a bit more protection. Wasn't sure if it was just an easy bolt-on to the existing steps or not.
 
Last edited:
installed some monster AuxBeam 7" lights on my front bumper and 4" on a-pillarsView attachment 15367
L👀ks great & I don’t want to be Debbie Downer so please keep an eye on your temp gauges to ensure those super nova lights aren’t impeding your cooling capabilities.
 
L👀ks great & I don’t want to be Debbie Downer so please keep an eye on your temp gauges to ensure those super nova lights aren’t impeding your cooling capabilities.
I hear ya. I'm keeping an eye on the temps...

If it does starting interfering with the cooling, I'll swap out the bull bar for the flat Wildhorses bumper mount.
 

Top Member Reactions

Back
Top Bottom